General
All data supplied is based on laboratory tests conducted at 20ºC, and 50% Relative Humidity. Atmospheric
conditions may require adaptation to suite circumstances.
All you need to know about coronavirus: www.sacoronavirus.co.za
STERILiTe Surface Disinfectant
STERILiTe® is a concentrated hydrogen peroxide-based multi-surface cleaner and disinfectant.
Proven to work against bacteria and viruses, hydrogen peroxide (H2 O2 ) is highly reactive and kills germs through oxidation (oxygen atoms interfering with the electrons of other cells and causing the walls of the bacteria cells to break down).
STERILiTe® is non-toxic and biodegradable.
STERILiTe® is intended for indoor and outdoor use and has a mild fragrance.
R 275.43
(All prices are inclusive of VAT)
All data supplied is based on laboratory tests conducted at 20ºC, and 50% Relative Humidity. Atmospheric
conditions may require adaptation to suite circumstances.
Do not ingest. Keep away from children and pets. Do not empty into a drain. Wear rubber gloves, and in
the event of prolonged contamination, rinse thoroughly with cold water. Seek medical attention if irritation
persists. Consult our Material Safety Data Sheet for more information.
IMPORTANT NOTICE
The information supplied in our literature or given by our employees is given in good faith. We reserve the
right to update this information at any time without prior notice. We guarantee the consistent high quality
of our products.
Spray / Fog / Mist onto the desired surface or area. Counters, desks and other working surfaces can be wiped if desired. Allow 2 – 3 minutes of contact time. Rinsing is not required unless utilsed in a food processing area.
Note:
It is not recommended to use STERILiTe® on the following surfaces:
Aluminum not coated or anodized, Brass, Copper, Galvanized steel, Natural stone,Rubber, Silver, Zinc
STERILiTe® can be used in a variety of spray apparatus as well as thermal and ULV misting and fogging machines. STERILiTe® can also be wiped onto surfaces. Used to clean and disinfect surfaces.
STERILiTe® must never be used to spray onto or over people or animals.
All data supplied is based on laboratory tests conducted at 20ºC, and 50% Relative Humidity. Atmospheric
conditions may require adaptation to suite circumstances.
Do not ingest. Keep away from children and pets. Do not empty into a drain. Wear rubber gloves, and in
the event of prolonged contamination, rinse thoroughly with cold water. Seek medical attention if irritation
persists. Consult our Material Safety Data Sheet for more information.
IMPORTANT NOTICE
The information supplied in our literature or given by our employees is given in good faith. We reserve the
right to update this information at any time without prior notice. We guarantee the consistent high quality
of our products.
Spray / Fog / Mist onto the desired surface or area. Counters, desks and other working surfaces can be wiped if desired. Allow 2 – 3 minutes of contact time. Rinsing is not required unless utilsed in a food processing area.
Note:
It is not recommended to use STERILiTe® on the following surfaces:
Aluminum not coated or anodized, Brass, Copper, Galvanized steel, Natural stone,Rubber, Silver, Zinc
STERILiTe® can be used in a variety of spray apparatus as well as thermal and ULV misting and fogging machines. STERILiTe® can also be wiped onto surfaces. Used to clean and disinfect surfaces.
STERILiTe® must never be used to spray onto or over people or animals.